Single Point Load Cells of Lorenz Messtechnik GmbH

Single point load cells are normally used for platforms with only one load cell and small nominal load. They are angulary load-compensated, so even if the platform is stressed at just one angle, the measurement result will be optimal.
Typical applications are for example retail scales, vending scales, dynamic scales (bulk goods), industrial bench scales and floor scales or mobile weighing systems.

AP

Type: AP
Measuring Range: 75..635 kg
Approval: EX-Approval, IECEx-Approval, NTEP-Approval, OIML-Approval
Description: Single Point Load Cell
For Platforms up to 700mm x 700mm
To 3000d OIML R60, 5000d NTEP
Flat Designed (47 mm)
PDF Datasheet: 080915_W-AP_en.pdf
PDF Operation Manual: -
CAD Files: -

Association for Sensors and Measurement AMA

Authorised Economic Operator AEOF

Quality Management ISO 9001