 |
LCV |
Strain Gauge (SG) Sensor Interface for the Conversion of SG-based Sensor (e.g. Force and Torque Sensors or Load Cells) Output Signals to normed Voltage Signals of ±5V, ±10V, 0/4 ... 20 mA, 10±10 mA or 12±8 mA for the direct Connection to e.g. a PLC or Production Machine. By the high Level of Protection IP67 of the Housing, the Measuring ... |
 |
SI |
SG Measuring Amplifier for the Conversion of SG-based Sensor (e.g. Force and Torque Sensors or Load Cells) Output Signals to normed Voltage Signals of ±5V, ±10V, 0/4 ... 20 mA, 10±10 mA or 12±8 mA for the direct Connection to e.g. a PLC or Production Machine. Through its robust Aluminum Die Cast Housing with high Level of ... |
 |
LMV |
SG Measuring Amplifier for the Conversion of SG-based Sensor (e.g. Force and Torque Sensors or Load Cells) Output Signals to normed Voltage Signals of 1 ... 9V or 5±4V for the direct Connection to e.g. a PLC or Production Machine. Through the very small Dimensions of the Amplifier Board, this Measuring Amplifier allows direct ... |
| Digital |
Type |
Technical Details |
 |
LCV-USB2 |
USB-Sensor Interface with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V, 0/4 … 20 mA, 10±10 mA or 12±8 mA are suitable for the Connection. Through the Measuring Rate ...
|
 |
SI-USB |
2 Channel USB-Sensor Interface with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up to ...
|
 |
SI-RS485 |
2 Channel RS485-Sensor Interface with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the RS485 Interface. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up to...
|
 |
SI-ETH |
2 Channel Ethernet-Sensor Interface SI-ETH with freely available Configuration and Evaluation Software VS2. The Evaluation and Excitation of the connected Sensor occurs via the Ethernet Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V or 0/4 … 20 mA are suitable for the Connection. Through the Measuring Rate of up ...
|
 |
SI-USB3 |
4 Channel USB-Sensor Interface with freely available Configuration and Evaluation Software VS3. The Evaluation and Excitation of the connected Sensor occurs via the USB Interface of the PC. Sensors with Output Signals of mV/V, ±5V, ±10V, 0/4 … 20 mA, 10±10 mA or 12±8 mA are suitable for the Connection. Through the Measuring Rate of up ...
|
