News
4 Channel USB-Sensor Interface SI-USB3 with Configuration and Evaluation Software VS3
Fast Measurement
of up to 5000/s- Full Synchronism of all Measuring Channels
- Up to 16bit Resolution
- Input Signal for mV, V, and mA
- Input Ranges for Linear Potentiometer and Temperature Probe PT100
- Input Ranges combinable with each other
- Adjustment and Control Signal Activation via Software
- Convenient Configuration- and Evaluation Software VS3 included in the Scope of Delivery
- Free LabVIEW- and DLL-Drivers enable Integration in own Software
Mobile SG-display unit GM 78
Hand-held measuring device with freely scalable OLED display- Display of physical unit and rated value mV/V
- Memory for up to four sensors
- 4- and 6- wire measurement
- USB-C plug-in power supply with battery charging function
- Integrated peak picker and signal inversion function
VOLTAGE RATIO mV/V
- We offer proprietary calibrations of voltage ratio mV/V for strain gauge measuring amplifiers or display devices (AC / DC voltage) in accordance with DIN EN 10012.
Further Development: LCV‑USB3 Sensor Interface with new Configuration and Evaluation Software VS3
Easy applicable "Plug and Play" Measuring System- Supply of the Measuring System via PC USB Port
- Up to 16bit Resolution
- Input Signal for mV, V and mA
- Fast Measurement up to 5000/s
- Calibration and Control Trigger via Software
- Connection possibility in many commercially available Sensors e.g. Force, Torque, Displacement or Pressure Sensors
- Comfortable Configuration and Evaluation Software inclusive
New Technology in the Speed/Angle Measurement for Torque Sensors with RS485
- Full Synchronism of Speed/Angle of Rotation with the Torque Measuring Signals
- Data Transfer via the RS485 Interface
- Simple Applicable "Plug and Play"
Compression Ring Force Sensor for Measurement of Clamping Forces
Measuring Range 15 kN (M6)..1500 kN (M52)- Measuring Washer
- Made of Stainless Steel
- Low Measuring Range, very high Natural Frequency
- Extremely flat and robust Sensor Design
- Ideal for determining Bolt Preload
Torque Sensor with USB‑Connection DR‑3000
Easy applicable "Plug and Play" Measuring System- Supply of the Measuring System via PC USB Port
- Up to 16bit Resolution
- Fast Measurement up to 2500/s
- Stores Settings in the Sensor
- Calibration and Control Trigger via Software
- Torque-, Angle-/Speed and Power- Evaluation
- Comfortable Configuration and Evaluation Software inclusive
Download: Flyer Torque Sensor with USB-Connection
Press Release: Anniversary: 100.000 Sensors sold!
Torque Sensor DR-2643
Nominal Torque from 0.1.. 5000 N·m- Active Output ±5V (optional ±10V)
- Virtually no Influence of the Bearing Friction on the Measuring Signal
- Speed up to 30,000 min-1
- Sample Rate 10 kSample
Torque Measuring Flange DR-2800
Active Output ±5V (±10V)- Contactless Data Transmission
- Maintenance-free, since no Bearings
- Very short axial Length
- High Torsional Stiffness
- Flange-Flange-Solution
- Rotor-sided Through Hole
- Integrated Speed Measurement (Option)
Torque Sensor DR-2554 – Compact, Accurate, Dynamic
Short Embodiment-length with Integrated Coupling- Bearing-free
- Active Output (±5V, ±10V)
- Integrated Speed Measurement (Option)
- Contactless, Digital Signal Transmission